91 days to 18 Feb 2027

November 17, 2026

Keeping a Battery Passport Accurate When Your Supplier Changes Cells

Suppliers substitute cells quietly and often. What that does to a battery passport, when a change means a new passport rather than an update, and how to find out before your customers do.

Cell substitution is normal in battery manufacturing. A cell line goes short, a grade is discontinued, a price moves, and the pack builder swaps in an equivalent from another supplier without telling anyone downstream. That was tolerable when the pack's paperwork was a datasheet. It is not tolerable when the pack carries a public record that you are responsible for keeping accurate.

What the regulation expects of the record

The passport is not a snapshot taken at the factory gate. It has to be accurate, and the operator that placed the battery on the market is the one responsible for keeping it so and for keeping it reachable for as long as the battery is in service. A passport that described the battery correctly in March and describes a different construction in September is a non-compliant passport, and the fault is not the supplier's from an authority's point of view. It is yours.

That is what makes silent substitution a compliance problem rather than a procurement one. See who is responsible for the battery passport.

Which fields a cell change actually moves

Not every substitution touches the passport, and treating every change as an emergency will exhaust the people who have to handle them. Work from the field list.

Almost always affected:

  • Cell chemistry and composition, where the substitute is a different chemistry or a different cathode formulation.
  • Substances of concern, if the new cell brings a different declared substance or a different concentration.
  • Materials by weight, where a different can, format or electrolyte shifts the breakdown.

Often affected:

  • Rated capacity, nominal voltage and voltage range, where the substitute is not an exact electrical match.
  • Expected lifetime in cycles, internal resistance and round-trip efficiency, which are cell properties before they are pack properties.
  • Operating temperature range, where the new cell has a different window.

Sometimes affected:

  • Dismantling information, if the cell format or the way cells are held changes.
  • Safety information and warnings.
  • Conformity evidence, because the test reports behind the declaration of conformity were run on the original construction.

Usually not affected:

  • Your identity as the responsible operator, the manufacturing place and date, the model identifiers you control, and the waste handling information.

The list is a useful thing to send to a supplier, because it converts a vague request to tell you about changes into a specific one: tell us if you change anything on this list.

Update, or new passport?

This is the question that decides how much work a change creates. The dividing line is whether you still have the same battery model or a different one.

Correcting a passport is right where the data was wrong or incomplete and the physical battery has not changed. A field you left empty because the supplier had not answered, a value you transcribed incorrectly, a document you can now attach. Fix it in place. The identity of the battery is unchanged and the record should reflect what was always true.

A new model, and therefore new passports, is right where the construction has changed enough that batteries built after the change are a different product from batteries built before it. A different cell chemistry is the clearest case. Batteries already sold keep their original passports, which stay accurate because they describe what those batteries actually are. Batteries built after the change get their own.

The mistake to avoid is overwriting the old passport with the new construction. That does not make the record more current, it makes it wrong for every unit already in the field, including the ones an authority or a recycler is most likely to scan.

A borderline case is a like-for-like substitution: same chemistry, same format, same declared electrical characteristics, different cell manufacturer. Whether that is a new model depends on how your declaration of conformity and technical documentation were framed, because those are the documents that define what the model is. If your conformity evidence was tied to a named cell, the substitution invalidates the evidence and you need it redone before those packs are placed on the market. See battery passport, CE marking and UN 38.3 and how to read a battery test report for passport data.

Finding out before your customers do

The hard part is not deciding what to do about a change. It is hearing about it.

Put change notification in the purchase terms. A clause requiring written notice of any change to cell supplier, cell model, chemistry, capacity, or the construction of the pack, a defined number of days before shipment, and requiring updated test reports where the change affects them. Suppliers accept this readily when it is in the contract and resist it entirely when it is a request in an email.

Tie it to the data you already ask for. If you send a structured data request per model, resend it per production run rather than once per model. Comparing two answers is fast; noticing an unannounced change from a photograph is not. See what your battery supplier must send you.

Ask for cell markings. Cells carry manufacturer and model markings. Requiring a photograph of the cell marking from each production lot, filed with the lot, gives you an independent check that costs the factory almost nothing.

Watch the test reports. A supplier who has changed cells will often send a new UN 38.3 report without mentioning why. A report with a new date and a new cell reference is a substitution announcing itself.

Treat unexplained spec drift as a signal. A capacity figure that moves by 3 percent between quotes, or a weight that changes, is rarely a typing error.

What to do when a change lands mid-run

  1. Establish the cut-over. Which serial numbers, lots or shipping dates are the new construction. Without that line you cannot tell which passport belongs to which battery.
  2. Check the conformity evidence. If the change touches anything the tests relied on, the declaration of conformity has to be revisited before those units go on the market.
  3. Decide update or new model, using the boundary above, and write down the reason. An authority asking why a model was split, or not split, is asking a reasonable question.
  4. Issue passports for the new units and leave the existing ones alone.
  5. Update the label plan. New model, new identifiers, new codes, and a factory that needs to know which artwork goes on which run.
  6. Record the change. Date, description, fields affected, evidence received. This record is the answer to the only difficult question anyone will ask later, which is when did you know.

The uncomfortable case

Sometimes you discover a substitution after the batteries are sold. There is no clean version of this. What you can do is establish the affected range, correct the record for those units so that it describes what they actually are rather than what you believed they were, check whether the change affects safety or conformity, and document the sequence. A passport that was corrected as soon as the importer learned the truth reads very differently from one that was silently overwritten.

In short

The passport must stay accurate, and that duty is yours, not your supplier's. Know which Annex XIII fields a cell change moves, correct in place only where the data was wrong rather than the battery different, issue new passports where the construction genuinely changed, and never overwrite the record of units already in the field. The real work is contractual: written change notification, per-run data requests, cell markings and test report dates give you the chance to act before somebody else notices.