October 20, 2026
How to Read a Battery Test Report for Passport Data
You probably already hold test reports that answer several passport fields. Here is what each type of report covers, which fields it feeds, and where it stops.
Before you chase your supplier for more data, look at what you already have. Most importers hold a folder of test reports gathered for shipping and product safety, and several of them answer passport fields directly. This guide covers what the common reports contain, what they feed, and where they stop being useful.
Start with what the passport asks for
The passport needs performance and durability figures, safety information, and the conformity evidence behind them. The test report results themselves sit in the tier reserved for notified bodies, market surveillance authorities and the Commission, while several of the figures they establish appear in the public tier. See who can see your battery passport data.
So a test report typically does two jobs at once: it gives you a number for a public field, and it is the evidence standing behind that number.
Transport safety testing
Almost every lithium battery shipped internationally has been through the UN transport tests, and you will usually hold a test summary for each cell and pack.
What it gives you: confidence that the pack has been formally tested, plus identifying detail such as the cell and pack description, weight and watt-hour rating, and the test house.
Where it stops: this is transport law, not the Battery Regulation. The tests are about whether a battery can be shipped safely, so they say nothing about cycle life, round-trip efficiency, recycled content or carbon footprint. Holding a transport test summary does not move you towards a passport in the way importers often assume. See how the passport, CE marking and UN 38.3 fit together.
Product safety testing
Cell and battery safety standards, such as the IEC 62133 family for portable sealed cells and batteries, cover abuse and fault conditions: overcharge, short circuit, crush, thermal behaviour and so on.
What it gives you: the substance behind the safety information the passport carries, and useful input to the safety measures in the restricted tier.
Where it stops: safety testing is not performance testing. It will not tell you the expected lifetime in cycles or the internal resistance.
Performance and cycle-life testing
This is the report most importers do not have and most need. Cycle-life and capacity testing is what establishes several public passport fields:
- Expected lifetime in cycles, and critically the reference test used to establish it.
- Round-trip energy efficiency, both initially and at half of cycle life.
- Internal resistance of the cell and of the pack.
- The c-rate of the relevant cycle-life test.
- Rated capacity and the voltage range.
The recurring problem here is a bare number. A datasheet claiming "1,000 cycles" with no test conditions is not usable, because the passport asks for the reference test alongside the figure. When you request this data, ask for the report, not the headline.
Conformity documentation
The EU declaration of conformity and the technical documentation behind it are the manufacturer's, and as importer you must verify they exist before placing the battery on the market, then keep the declaration for ten years (Art. 41 of Regulation (EU) 2023/1542).
What it gives you: the conformity evidence the passport references, and a reliable list of what the manufacturer has actually assessed.
What no test report will give you
Two of the environmental declarations cannot come from a test house at all:
- Carbon footprint is calculated from how and where the battery and its materials were made, to a method the Commission sets. See the carbon footprint declaration.
- Recycled content in cobalt, lead, lithium and nickel depends on material sourcing records, not measurement of the finished pack. See recycled content declaration.
If a supplier offers a test report as the answer to either, that is a misunderstanding worth correcting early.
A practical way to work through the folder
- Take one model and list the reports you hold for it.
- Mark each report with the passport fields it answers.
- Note which fields have a number but no supporting report, since those are the weakest claims in your passport.
- Note which fields nothing covers, which is usually performance and durability.
- Send one request covering only the genuine gaps. See what your supplier must send you.
This usually shrinks the supplier request substantially, which makes it far more likely to be answered.
In short
Transport test summaries prove shippability and little else. Product safety testing feeds the safety information. Performance and cycle-life testing is what establishes the lifetime, efficiency and resistance figures, and it is the report most importers are missing. Carbon footprint and recycled content come from records rather than testing. Audit the folder you already have before you write to the factory, because the request you send will be shorter and better answered.