October 13, 2026
From Passport to Print: Preparing Your QR Data-Carrier Labels
Getting the QR code onto the battery is a production job, not a design job. Here is the sequence, the placement and durability rules, and the mistakes that are expensive to undo.
The passport is a data problem right up until the moment it becomes a printing problem. From 18 February 2027 the QR code giving access to the passport has to be on the battery, which means artwork, tooling and a production run. This guide covers the sequence, the rules that constrain it, and the mistakes that cannot be fixed after the fact.
The sequence matters
Work in this order, because each step depends on the one before:
- Build the passport for the model, so the record exists.
- Fix its web address. This is the step people skip, and it is the one that cannot be undone.
- Generate the code encoding that address.
- Place it in the artwork and confirm placement against the rules.
- Get it into a production run at the plant.
- Scan-test physical samples from that run before volume.
The common failure is doing this in reverse: designing a label, printing it, and only then deciding where passports will live. Every code printed against an address you later change is a battery in the field with a broken passport, and you cannot recall a printed pack.
Where the code goes
The regulation is specific. The labels and the QR code must be printed or engraved visibly, legibly and indelibly on the battery itself. Only where that is not possible or not warranted given the nature and size of the battery may they instead be affixed to the packaging and to the accompanying documents (Art. 13(7) of Regulation (EU) 2023/1542).
For most LMT and storage products this means the battery. An e-bike pack or a storage module has ample surface, so the packaging route is not available simply because it is more convenient. Reserve that option for genuinely small batteries.
How the code must look
The appearance requirements are practical rather than decorative. The QR code has to be in high contrast to the background colour and of a size easily readable by a commonly available QR reader, such as the one in a phone.
That rules out a few things designers reach for: printing the code in a brand colour with low contrast, shrinking it to fit a crowded label, or placing it across a seam or a curve tight enough to distort it.
The separate collection symbol has its own sizing rules
While you are in the artwork, the collection symbol has defined proportions. It must cover at least 3% of the area of the largest side of the battery, up to a maximum of 5 by 5 centimetres. For cylindrical cells the figure is at least 1.5% of the surface area, again capped at 5 by 5 centimetres. Where the symbol would be smaller than 0.47 by 0.47 centimetres, the battery need not carry it, and instead a symbol of at least 1 by 1 centimetres goes on the packaging (Art. 13(4)).
Unlike the general battery label, whose date follows a separate Commission act, the collection symbol requirement has applied since 18 August 2025.
The standard behind the code
The QR code and the battery's unique identifier have to comply with the ISO/IEC 15459 series on unique identifiers, or an equivalent (Art. 77). The regulation does not mandate a particular commercial scheme. GS1 Digital Link is one common way to implement a conforming identifier as a web address, but that is an implementation choice. See the data carrier and QR code rules.
Durability is a real requirement
"Indelibly" is doing work in that sentence. The code has to survive the battery's working life, which for an e-bike pack means weather, cleaning, abrasion in a frame mount, and years of handling; for a storage module it means decades in a plant room. Options in practice include laser marking or engraving, in-mould labelling, and durable printed labels with a suitable adhesive and overlaminate.
Test the choice rather than trusting the specification sheet: abrade a sample, expose it, clean it with what your customers will use, and scan it again.
Practical checks before volume
- Scan from a real phone, not a barcode scanner, at arm's length and in poor light.
- Scan a pack in its mounted position, not flat on a bench, since the code may be partly obscured once installed.
- Confirm the address resolves to the right passport for that model, and that the public tier looks correct to a stranger.
- Check a production sample, not a proof. Print and engraving on the real substrate rarely match the proof exactly.
Timing with the factory
Marking is a tooling and artwork change, which plants schedule into production runs. Raise it at least one run ahead of when you need marked stock, and remember the passport has to exist before that run starts. For imported goods this is the step most likely to slip, because it involves the factory rather than your own team. See importing batteries from China.
In short
Build the passport, fix its address permanently, then generate the code, place it in artwork, and get it into a production run with scan-tested samples. The code goes on the battery itself, in high contrast and at a readable size, durable enough to last the battery's life, and compliant with the ISO/IEC 15459 identifier standard. The one irreversible mistake is printing codes against a web address you later move.